GE Fanuc IC660EBD101 Electronics Assembly Genius I-O 1500 V 8 Outputs At 2 A
More Information:
The IC660EBD101 serves as an integral component of the IC660BBD101, an 8-circuit 115 VAC combination input/output (I/O) block module. Specifically engineered as an electronic assembly, it functions as a direct replacement part for existing IC660BBD101 installations, incorporating the essential circuitry that enables the module’s core operational capabilities.
As a configurable combination I/O module, the IC660EBD101 allows each of its 8 channels to be set as either an input or an output, all rated for 115 VAC operation. Input channels are designed to accept a current of 6 mA, while each output channel can deliver a maximum current of 2 A. Notably, this electronic assembly requires pairing with a terminal base specified by the catalog number IC660TSD101 for proper installation and functionality.
Key internal components of the IC660EBD101 include a Metal Oxide Varistor (MOV), a 0.1 µF capacitor, an internal smart switch, and LED status indicators dedicated to each individual channel. Beyond component integration, the assembly facilitates critical operations such as data exchange with the host controller and establishes connectivity to external power supplies. It also features built-in diagnostic capabilities, enabling detection of overtemperature, short circuits, open wires, no-load conditions, overloads, and failed switch scenarios.
In terms of wiring compatibility, the IC660EBD101 supports both non-tristate and tristate input configurations, while its output circuits are optimized for sourcing arrangements. An internally mounted switch is additionally provided to enhance module protection.
Manufactured by GE Intelligent Platforms/GE Fanuc Automation, the IC660EBD101 is part of the Genius I/O block series. Its physical specifications include approximate dimensions of 8.83 x 3.50 x 3.94 inches and a weight of roughly 4 pounds. For operational status monitoring, it is equipped with "I/O Enabled" and "Unit OK" LEDs, as well as circuit-specific LED indicators located on the logic side of the internal switch.
Electrical performance parameters for the assembly are as follows: it operates on a single AC power source with a voltage range of 93 to 132 V and a frequency range of 47 to 63 Hertz. Heat dissipation varies by configuration—16 Watts when utilizing 8 inputs, 43 Watts when operating 8 outputs at the 2 A current rating, and 8.5 Watts in standby mode (with all I/O channels deactivated). It also boasts a block-to-block isolation voltage rating of 1500 Volts.
Environmental operating requirements for the IC660EBD101 include a temperature range of 0 to 60 degrees Celsius, a storage temperature range of -40 to 100 degrees Celsius, and a relative humidity tolerance of 5% to 95% (non-condensing). Additionally, it maintains stability under vibration conditions ranging from 5 to 10 Hertz.
The module’s 8 circuits are organized into isolated groups and rated for a nominal 115 VAC. The function of each channel’s LED indicator adapts to its configuration: when set as an input, the LED displays the threshold voltage present at the input terminal; when configured as an output, it indicates the operational state commanded by the CPU.
We still can offer these Models:
| Manufacturer Name |
Part Number |
Description |
| EMERSON |
02-766050-10 |
REGULATOR BOARD |
| EMERSON |
02-766480-00 |
CLOCK DRIVER BD |
| EMERSON |
02-766431-00 |
BOOT STRAP BD |
| EMERSON |
02-766290-01 |
GATE DRIVE CARD |
| EMERSON |
02-766030-05 |
LVC/VCO BOARD |
| EMERSON |
02-766160-10 |
TEST PANEL |
| EMERSON |
02-766030-01 |
LVC/VCO BOARD |
| EMERSON |
02-766050-06 |
LVO/VCO BOARD |
| EMERSON |
02-766050-04 |
LVO/VCO BOARD |
| EMERSON |
02-766400-05 |
NORMALIZING BD |
| EMERSON |
02-766372-11 |
GATE DRIVE ASSY |
| EMERSON |
02-766050-16 |
LVO/VCO BOARD |
| EMERSON |
02-766400-06 |
NORMALIZING BD |
| EMERSON |
02-766395-00 |
DIGITAL BD 5100 |
| EMERSON |
02-766430-00 |
BOOT STRAP BD |
| EMERSON |
02-766030-11 |
|
| GATE DRIVE ASSY |
| EMERSON |
02-766372-12 |
GATE DRIVE ASSY |
| EMERSON |
02-766400-07 |
NORMALIZING BD |
| EMERSON |
02-766385-10 |
CUST. INTF. B.D. |
| EMERSON |
83-785374-00 |
BOOT STRAP ASSY |
| EMERSON |
02-783251-01 |
AS250-C |
| EMERSON |
2200-8360 |
SPECTRUM 2 DR. |
| EMERSON |
1060-7 |
ES225 CTRL. BD. |
| EMERSON |
2600-4005 |
DRIVE BD 2600RG |
| EMERSON |
1550-4210 |
DISPLAY BOARD |
| EMERSON |
2950-4207 |
BASE DRIVER BD. |
| EMERSON |
761-1 |
CLUTCH CONTROL |
| EMERSON |
2950-4028 |
PRISM DRIVER BD |
| EMERSON |
2450-4011 |
SIG. BD. #9011 |
| RED LION |
51-610-43 |
TACHOMETER |
| CUSTOM SERVO |
362377-01D |
COUNTER BOARD |
| INDUSTRIAL INDEXING |
MM-10 PLUS |
INDEX SYSTEM BD |
| ALLEN BRADLEY |
7300-UCR-2 |
INTERFACE MOD. |
| ALLEN BRADLEY |
1333-BAB/B |
AC DRIVE 3HP/460V |
| CURTIS INSTRUMENTS |
933-E12A |
BATTERY CONTROLLER |
| LUCIDYNE |
16-0100-01 |
FLASH-TUBE CARD |
| ALLEN BRADLEY |
1772-LE |
PROCESSOR MOD. |
| RELIANCE |
0-51893-1 |
FCCB Card |
| JEWELL |
369 |
'45' CONTROLLER |
Introduction of Wisdomlong Technology CO.,LTD
The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.
OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD
| Yasakawa Motor, Driver SG- |
| Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
| Emerson VE-,KJ- |
| Honeywell TC-,TK- |
| GE Modules IC - |
| Yokogawa transmitter EJA- |
Our brands of Wisdomlong Technology CO.,LTD
Terms OF GE IC660EBD101
1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
4. Packaging and Handling:
Items are safely packaged in custom shipping cartons for protection.
Shipping OF GE IC660EBD101
1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.
FAQ OF GE IC660EBD101
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea users. Please feel free contact us by email, WhatsApp, WeChat and SKYPE.
Uw bericht moet tussen de 20-3.000 tekens bevatten!